Origin

China

this machine is used to produce PET bottle , the max capacity is 2.5L.
with the preform made by injection molding machine, it can blow them to the shape you need.
it is high productivity, easy operation, good stablity,


项目Item 单位Unit 参数Data
制品容量Bottle Volume L 2.5L
吹瓶气压Blowing Pressure Pma 1.5
生产量 Production Capacity BT/hr 1500（2台吹瓶器）
瓶坯直径 Proform Diameter Mm 15-120
电源 Electricity V 220
功率Power KW 3.5
重量Weight Kg 1000
外型尺寸（L*W*H） m 1.6*0.66*1.5 (烘箱)
项目Item 单位Unit 参数Data
合模力Max. clamping force KN 1500
移模行程Max. opening force mm 460
拉杆有效间距（V?）
Space between tie bars mm 480?80
允许的模厚（min-max）
Mould height mm 180-500
模板最大开距Max. daylight mm 960
液压顶出力Ejector force KN 45.2
液压顶出行程Ejector stroke mm 115
液压顶出杆的总数Ejector quantity 5
螺杆的直径Screw diameter mm 45 50 55
螺杆的长径比Screw L/D ratio L/D 23.3 21 19.1
理论注射容积Theoretical shot volume cm3 358 442 534
注射质量（PS料）Plasticising weight(PS) g 326 402 486
注射压力Injection pressure Mpa 231.1 187.2 154.7
理论注射速率（PS料）
Theoretical injection rate(PS) g 92 113.8 137.6
塑化能力（PS料）Plasticising capacity(PS) g/s 12.4 16.6 22.1
螺杆驱动扭矩Screw torque N.m 1240
螺杆最高转速Max. screw rotate speed r/min 135
注射行程Injection stroke mm 225
移座推力Carriage push force KN 60.3
油泵电动机功率Pump motor power KW 15
油泵最高压力Pump pressure Mpa 16
料筒加热功率Heating power KW 13.5
加热区段Heating zone 3
机器的外形（L??）
Size m 5.3?.35?.9
机器的净重Net weight t 5.3
国际公认型号International designation 1500-830